For 97-06 Jeep TJ Wrangler and LJ Unlimited Front

The Currie Antirock® Sway Bar provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight over all four tires. The Antirock® Off-Road sway bar is designed to replace the stock Jeep sway bar.

The Sway Bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition. This kit includes all components, bushing, hardware and step by step instructions. It is positioned through the front cross member and attaches to the stock mounts on the axle housing on the Jeep TJ's and LJ's.

The Currie Antirock® Sway Bar does not need to be disconnected for off-road use.

Jeeps will have more body roll than stock. This Sway Bar may be used on the street, however it will not provide the same performance as the stock setup.

Also See Our Johnny Joint Products

For 97-06 Jeep TJ Wrangler and LJ Unlimited Rear

Currie now offers Antirock® Sway Bar kits in a universal from for those building their own custom rigs and rock buggys. The universal kits are available in 3 different torsion bar lengths - a 32" bar, a 36" bar, and a 44.5" bar. These kits offer you a choice of arm lengths and you must specify desired arm length when ordering. Arms are available in 17", 18", and 20". Vertical links use a 11/16" x .120 wall chrome moly tube that can be cut down to your desired length and necessessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld in 1.75" x .188 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushing to support the bar in the tube .32" bar is a .700" diameter, 36" bar is a .750" diameter, and the 44.5" bar is .800" diameter. New!!! Universal Antirock® kits are now available with the aluminum arm upgrade for the weight conscious competitor.

Currie now offers optional machined lightweight aluminum arms for the Antirock® sway bars for the hard core rock crawling crowd. These arms are machined out of 6061T6 3/4" thick aluminum and are available in a 18" and 20" lengths. The 18" arms weight just 1.5 lbs. and the 20", weight 2 lbs., compare to the 3.5 lb. weight of the standard steel arms. The aluminum arms feature the same 5 adjustable link mounting holes that the steel arms feature.

Aluminum Antirock® Sway bar 18" Arms
Aluminum Antirock® Sway bar 18" Arms - modified for TJ/LJ Front Application
Aluminum Antirock® Sway bar 20" Arms
Aluminum Antirock® Sway bar 20" Arms - bent for TJ/LJ Rear Application